Maderia Outdoor 5pc Dining Set
The Maderia Outdoor 5 Piece Mid-Height Dining Set combines lounge seating with a mid-height dining table in a single five-piece arrangement ā a 3-seater lounge, two single armchairs, a mid-height dining table, and a dining bench. The mid-height table sits between standard coffee table and full dining table height, making it usable for both relaxed lounging and seated alfresco meals without swapping furniture. Polywood is used for the tabletop and armrest inserts, while the powder-coated aluminium frame and UV-protected cushions are suited to permanent outdoor placement. Seats up to 8.
3-Seater Lounge
Ć 1
Single Chair
Ć 2
Dining Table
Mid-Height Ć 1
Dining Bench
Ć 1
Full Set
Seats up to 8
Rust-Resistant Aluminium Frame
Powder-coated aluminium across all five pieces ā lightweight, corrosion-resistant, and suited to permanent outdoor placement without treatment.
Polywood Table & Armrest Inserts
Slatted Polywood tabletop and Polywood armrest inserts ā a recycled plastic lumber material that gives the look of timber with no oiling, sealing, or weathering.
Mid-Height Dining Table
Table height bridges coffee and full dining table ā practical for both relaxed lounging from a sofa position and seated alfresco dining without needing separate furniture.
UV-Protected Weatherproof Cushions
Generously padded cushions with a parallel stitched design ā weatherproof, water-repellent, and UV-protected to resist fading under direct outdoor sun.
Polywood & the Mid-Height Table
Polywood is a recycled plastic lumber material made primarily from post-consumer HDPE (high-density polyethylene) ā the same plastic used in milk jugs and similar containers. It is engineered to replicate the look of slatted timber while offering properties that natural wood cannot: it does not absorb moisture, does not warp or crack, does not rot, and does not require oiling, sealing, or any form of periodic treatment. Its colour is consistent throughout the material, meaning surface scratches do not reveal a different colour underneath. For an outdoor tabletop and armrest inserts that will be exposed to rain, direct sun, and daily contact, Polywood is a genuinely low-maintenance choice.
The mid-height dining table is designed to sit at a height that is accessible from both a lounging and a more upright seated position. Rather than being strictly a coffee table or strictly a dining table, it bridges both functions ā meaning the Maderia set works for a casual drink with the lounge seats, a full alfresco meal, and everything in between, without the need for a separate dining or side table.
Cushions
Spot clean with a mild soap solution and a soft cloth. Rinse and allow to air dry fully before restoring to position. Do not machine wash.
Polywood Tabletop & Armrests
Wipe down with a damp cloth and mild soap. No oiling, sealing, or annual treatment required ā Polywood is maintenance-free under normal outdoor use.
Aluminium Frame
Wipe down with a damp cloth as needed. Avoid abrasive cleaners that may scratch or wear the powder-coat finish across the frame.
Extended Storage
Store cushions indoors or use a breathable cover during extended non-use periods. The Polywood and aluminium components can remain outdoors year-round.
Maderia Outdoor 5 Piece Mid-Height Dining Set ā Full Product Details
The Maderia Outdoor 5 Piece Mid-Height Dining Set is a complete outdoor lounge and dining arrangement consisting of a 3-seater lounge, two single armchairs, a mid-height dining table, and a dining bench. All pieces use a rust-resistant powder-coated aluminium frame. The table features a slatted Polywood tabletop, and Polywood inserts are used on the armrests ā Polywood is a recycled HDPE plastic lumber that replicates the appearance of timber with no maintenance requirements: no oiling, sealing, or weathering.
The mid-height table sits between standard coffee table and full dining height, making the set functional for both relaxed outdoor lounging from a sofa position and seated alfresco dining. This removes the need for two separate table setups in the same outdoor space. All cushions are weatherproof, water-repellent, and UV-protected, with a parallel stitched line design across the seat and back surfaces. The set seats up to 8 people across the sofa, armchairs, and bench.
The Maderia Outdoor 5 Piece Mid-Height Dining Set is available online and in store as part of the A2Z Furniture outdoor furniture range ā Rocklea, Sandgate, Bundall (Gold Coast), North Ipswich, and Beenleigh.
The Maderia Outdoor 5 Piece Mid-Height Dining Set combines lounge seating with a mid-height dining table in a single five-piece arrangement ā a 3-seater lounge, two single armchairs, a mid-height dining table, and a dining bench. The mid-height table sits between standard coffee table and full dining table height, making it usable for both relaxed lounging and seated alfresco meals without swapping furniture. Polywood is used for the tabletop and armrest inserts, while the powder-coated aluminium frame and UV-protected cushions are suited to permanent outdoor placement. Seats up to 8.
3-Seater Lounge
Ć 1
Single Chair
Ć 2
Dining Table
Mid-Height Ć 1
Dining Bench
Ć 1
Full Set
Seats up to 8
Rust-Resistant Aluminium Frame
Powder-coated aluminium across all five pieces ā lightweight, corrosion-resistant, and suited to permanent outdoor placement without treatment.
Polywood Table & Armrest Inserts
Slatted Polywood tabletop and Polywood armrest inserts ā a recycled plastic lumber material that gives the look of timber with no oiling, sealing, or weathering.
Mid-Height Dining Table
Table height bridges coffee and full dining table ā practical for both relaxed lounging from a sofa position and seated alfresco dining without needing separate furniture.
UV-Protected Weatherproof Cushions
Generously padded cushions with a parallel stitched design ā weatherproof, water-repellent, and UV-protected to resist fading under direct outdoor sun.
Polywood & the Mid-Height Table
Polywood is a recycled plastic lumber material made primarily from post-consumer HDPE (high-density polyethylene) ā the same plastic used in milk jugs and similar containers. It is engineered to replicate the look of slatted timber while offering properties that natural wood cannot: it does not absorb moisture, does not warp or crack, does not rot, and does not require oiling, sealing, or any form of periodic treatment. Its colour is consistent throughout the material, meaning surface scratches do not reveal a different colour underneath. For an outdoor tabletop and armrest inserts that will be exposed to rain, direct sun, and daily contact, Polywood is a genuinely low-maintenance choice.
The mid-height dining table is designed to sit at a height that is accessible from both a lounging and a more upright seated position. Rather than being strictly a coffee table or strictly a dining table, it bridges both functions ā meaning the Maderia set works for a casual drink with the lounge seats, a full alfresco meal, and everything in between, without the need for a separate dining or side table.
Cushions
Spot clean with a mild soap solution and a soft cloth. Rinse and allow to air dry fully before restoring to position. Do not machine wash.
Polywood Tabletop & Armrests
Wipe down with a damp cloth and mild soap. No oiling, sealing, or annual treatment required ā Polywood is maintenance-free under normal outdoor use.
Aluminium Frame
Wipe down with a damp cloth as needed. Avoid abrasive cleaners that may scratch or wear the powder-coat finish across the frame.
Extended Storage
Store cushions indoors or use a breathable cover during extended non-use periods. The Polywood and aluminium components can remain outdoors year-round.
Maderia Outdoor 5 Piece Mid-Height Dining Set ā Full Product Details
The Maderia Outdoor 5 Piece Mid-Height Dining Set is a complete outdoor lounge and dining arrangement consisting of a 3-seater lounge, two single armchairs, a mid-height dining table, and a dining bench. All pieces use a rust-resistant powder-coated aluminium frame. The table features a slatted Polywood tabletop, and Polywood inserts are used on the armrests ā Polywood is a recycled HDPE plastic lumber that replicates the appearance of timber with no maintenance requirements: no oiling, sealing, or weathering.
The mid-height table sits between standard coffee table and full dining height, making the set functional for both relaxed outdoor lounging from a sofa position and seated alfresco dining. This removes the need for two separate table setups in the same outdoor space. All cushions are weatherproof, water-repellent, and UV-protected, with a parallel stitched line design across the seat and back surfaces. The set seats up to 8 people across the sofa, armchairs, and bench.
The Maderia Outdoor 5 Piece Mid-Height Dining Set is available online and in store as part of the A2Z Furniture outdoor furniture range ā Rocklea, Sandgate, Bundall (Gold Coast), North Ipswich, and Beenleigh.
Original: $1,515.49
-70%$1,515.49
$454.65Description
The Maderia Outdoor 5 Piece Mid-Height Dining Set combines lounge seating with a mid-height dining table in a single five-piece arrangement ā a 3-seater lounge, two single armchairs, a mid-height dining table, and a dining bench. The mid-height table sits between standard coffee table and full dining table height, making it usable for both relaxed lounging and seated alfresco meals without swapping furniture. Polywood is used for the tabletop and armrest inserts, while the powder-coated aluminium frame and UV-protected cushions are suited to permanent outdoor placement. Seats up to 8.
3-Seater Lounge
Ć 1
Single Chair
Ć 2
Dining Table
Mid-Height Ć 1
Dining Bench
Ć 1
Full Set
Seats up to 8
Rust-Resistant Aluminium Frame
Powder-coated aluminium across all five pieces ā lightweight, corrosion-resistant, and suited to permanent outdoor placement without treatment.
Polywood Table & Armrest Inserts
Slatted Polywood tabletop and Polywood armrest inserts ā a recycled plastic lumber material that gives the look of timber with no oiling, sealing, or weathering.
Mid-Height Dining Table
Table height bridges coffee and full dining table ā practical for both relaxed lounging from a sofa position and seated alfresco dining without needing separate furniture.
UV-Protected Weatherproof Cushions
Generously padded cushions with a parallel stitched design ā weatherproof, water-repellent, and UV-protected to resist fading under direct outdoor sun.
Polywood & the Mid-Height Table
Polywood is a recycled plastic lumber material made primarily from post-consumer HDPE (high-density polyethylene) ā the same plastic used in milk jugs and similar containers. It is engineered to replicate the look of slatted timber while offering properties that natural wood cannot: it does not absorb moisture, does not warp or crack, does not rot, and does not require oiling, sealing, or any form of periodic treatment. Its colour is consistent throughout the material, meaning surface scratches do not reveal a different colour underneath. For an outdoor tabletop and armrest inserts that will be exposed to rain, direct sun, and daily contact, Polywood is a genuinely low-maintenance choice.
The mid-height dining table is designed to sit at a height that is accessible from both a lounging and a more upright seated position. Rather than being strictly a coffee table or strictly a dining table, it bridges both functions ā meaning the Maderia set works for a casual drink with the lounge seats, a full alfresco meal, and everything in between, without the need for a separate dining or side table.
Cushions
Spot clean with a mild soap solution and a soft cloth. Rinse and allow to air dry fully before restoring to position. Do not machine wash.
Polywood Tabletop & Armrests
Wipe down with a damp cloth and mild soap. No oiling, sealing, or annual treatment required ā Polywood is maintenance-free under normal outdoor use.
Aluminium Frame
Wipe down with a damp cloth as needed. Avoid abrasive cleaners that may scratch or wear the powder-coat finish across the frame.
Extended Storage
Store cushions indoors or use a breathable cover during extended non-use periods. The Polywood and aluminium components can remain outdoors year-round.
Maderia Outdoor 5 Piece Mid-Height Dining Set ā Full Product Details
The Maderia Outdoor 5 Piece Mid-Height Dining Set is a complete outdoor lounge and dining arrangement consisting of a 3-seater lounge, two single armchairs, a mid-height dining table, and a dining bench. All pieces use a rust-resistant powder-coated aluminium frame. The table features a slatted Polywood tabletop, and Polywood inserts are used on the armrests ā Polywood is a recycled HDPE plastic lumber that replicates the appearance of timber with no maintenance requirements: no oiling, sealing, or weathering.
The mid-height table sits between standard coffee table and full dining height, making the set functional for both relaxed outdoor lounging from a sofa position and seated alfresco dining. This removes the need for two separate table setups in the same outdoor space. All cushions are weatherproof, water-repellent, and UV-protected, with a parallel stitched line design across the seat and back surfaces. The set seats up to 8 people across the sofa, armchairs, and bench.
The Maderia Outdoor 5 Piece Mid-Height Dining Set is available online and in store as part of the A2Z Furniture outdoor furniture range ā Rocklea, Sandgate, Bundall (Gold Coast), North Ipswich, and Beenleigh.
