Maderia 4 Piece Outdoor Sofa Set
The Maderia Outdoor 4 Piece Lounge Set is a charcoal outdoor lounge arrangement consisting of a 3-seater sofa, two single armchairs, and a coffee table with a Polywood slatted top. The powder-coated aluminium frame features Polywood inserts on the armrests, matching the coffee table surface — giving the set a timber-look accent without the maintenance that natural wood requires. Cushions are weatherproof, water-repellent, and UV-protected. Also available in a 5 Piece Mid-Height Dining variant that adds a bench and replaces the coffee table with a mid-height dining table.
3-Seater Lounge
× 1
Single Armchair
× 2
Coffee Table
Polywood Top × 1
Full Set
4 pieces total
Charcoal Powder-Coated Aluminium Frame
Rust-resistant aluminium frame across all four pieces — lightweight, weather-resistant, and suited to year-round outdoor placement without treatment.
Polywood Coffee Table Top & Arm Inserts
Polywood used on the coffee table surface and integrated into the armrests on all seating pieces — timber appearance with no oiling, sealing, or weathering required.
Weatherproof UV-Protected Cushions
Seat and back cushions across the 3-seater and both armchairs — weatherproof, water-repellent, and UV-protected to resist fading under direct outdoor sun.
KD Assembly (Knock-Down)
The set ships flat-packed and assembles without specialist tools — components connect with straightforward hardware included in the box.
About Polywood
Polywood is a recycled plastic lumber material made primarily from post-consumer HDPE (high-density polyethylene). It is engineered to replicate the look of slatted timber while offering properties that natural wood cannot: it does not absorb moisture, does not warp or crack, does not rot, and requires no oiling, sealing, or annual treatment. Its colour is consistent throughout the material, meaning surface scratches do not reveal a different colour underneath. For outdoor furniture that stays in place year-round in Queensland's climate, Polywood is a genuinely low-maintenance surface choice.
On the Maderia 4 Piece set, Polywood appears in two places: as the slatted surface on the coffee table top, and as insert panels on the armrests of the 3-seater and both armchairs. The charcoal aluminium frame and Polywood inserts are finished in complementary tones, creating a consistent two-material look across the set. Both are cleaned with a damp cloth — no specialist products needed.
Polywood Table Top & Arm Inserts
Wipe down with a damp cloth and mild soap — no oiling, sealing, or treatment required. The surface is maintenance-free under normal outdoor use.
Aluminium Frame
Wipe down with a damp cloth as needed. Avoid abrasive cleaners that may scratch the charcoal powder-coat finish.
Cushions
Spot clean with mild soap and a soft cloth. Rinse and allow to air dry fully before restoring to position. Store indoors or cover during extended non-use periods.
Extended Storage
The Polywood and aluminium components can remain outdoors year-round. A breathable furniture cover during extended non-use will keep cushions in best condition and reduce dust accumulation.
Maderia Outdoor 4 Piece Lounge Set — Full Product Details
The Maderia Outdoor 4 Piece Lounge Set is a charcoal outdoor lounge arrangement consisting of a 3-seater sofa, two single armchairs, and a coffee table. All pieces use a charcoal powder-coated aluminium frame. Polywood — a recycled HDPE plastic lumber material — is used for the slatted coffee table top and as armrest inserts on all three seating pieces. The cushions across the sofa and armchairs are weatherproof, water-repellent, and UV-protected. The set ships as KD (knock-down) flat-pack and assembles with included hardware.
Polywood requires no oiling, sealing, or periodic treatment. It does not warp, crack, or rot when exposed to moisture or UV, and can be cleaned with a damp cloth — the same care required for the aluminium frame. This makes the Maderia 4 Piece a practical low-maintenance lounge option for patios, alfresco areas, and garden decks. For a dining-capable variant within the same range, the Maderia 5 Piece Mid-Height Dining Set adds a bench and replaces the coffee table with a mid-height dining table.
Available online and in store as part of the A2Z Furniture outdoor furniture range — Rocklea, Sandgate, Bundall (Gold Coast), North Ipswich, and Beenleigh.
The Maderia Outdoor 4 Piece Lounge Set is a charcoal outdoor lounge arrangement consisting of a 3-seater sofa, two single armchairs, and a coffee table with a Polywood slatted top. The powder-coated aluminium frame features Polywood inserts on the armrests, matching the coffee table surface — giving the set a timber-look accent without the maintenance that natural wood requires. Cushions are weatherproof, water-repellent, and UV-protected. Also available in a 5 Piece Mid-Height Dining variant that adds a bench and replaces the coffee table with a mid-height dining table.
3-Seater Lounge
× 1
Single Armchair
× 2
Coffee Table
Polywood Top × 1
Full Set
4 pieces total
Charcoal Powder-Coated Aluminium Frame
Rust-resistant aluminium frame across all four pieces — lightweight, weather-resistant, and suited to year-round outdoor placement without treatment.
Polywood Coffee Table Top & Arm Inserts
Polywood used on the coffee table surface and integrated into the armrests on all seating pieces — timber appearance with no oiling, sealing, or weathering required.
Weatherproof UV-Protected Cushions
Seat and back cushions across the 3-seater and both armchairs — weatherproof, water-repellent, and UV-protected to resist fading under direct outdoor sun.
KD Assembly (Knock-Down)
The set ships flat-packed and assembles without specialist tools — components connect with straightforward hardware included in the box.
About Polywood
Polywood is a recycled plastic lumber material made primarily from post-consumer HDPE (high-density polyethylene). It is engineered to replicate the look of slatted timber while offering properties that natural wood cannot: it does not absorb moisture, does not warp or crack, does not rot, and requires no oiling, sealing, or annual treatment. Its colour is consistent throughout the material, meaning surface scratches do not reveal a different colour underneath. For outdoor furniture that stays in place year-round in Queensland's climate, Polywood is a genuinely low-maintenance surface choice.
On the Maderia 4 Piece set, Polywood appears in two places: as the slatted surface on the coffee table top, and as insert panels on the armrests of the 3-seater and both armchairs. The charcoal aluminium frame and Polywood inserts are finished in complementary tones, creating a consistent two-material look across the set. Both are cleaned with a damp cloth — no specialist products needed.
Polywood Table Top & Arm Inserts
Wipe down with a damp cloth and mild soap — no oiling, sealing, or treatment required. The surface is maintenance-free under normal outdoor use.
Aluminium Frame
Wipe down with a damp cloth as needed. Avoid abrasive cleaners that may scratch the charcoal powder-coat finish.
Cushions
Spot clean with mild soap and a soft cloth. Rinse and allow to air dry fully before restoring to position. Store indoors or cover during extended non-use periods.
Extended Storage
The Polywood and aluminium components can remain outdoors year-round. A breathable furniture cover during extended non-use will keep cushions in best condition and reduce dust accumulation.
Maderia Outdoor 4 Piece Lounge Set — Full Product Details
The Maderia Outdoor 4 Piece Lounge Set is a charcoal outdoor lounge arrangement consisting of a 3-seater sofa, two single armchairs, and a coffee table. All pieces use a charcoal powder-coated aluminium frame. Polywood — a recycled HDPE plastic lumber material — is used for the slatted coffee table top and as armrest inserts on all three seating pieces. The cushions across the sofa and armchairs are weatherproof, water-repellent, and UV-protected. The set ships as KD (knock-down) flat-pack and assembles with included hardware.
Polywood requires no oiling, sealing, or periodic treatment. It does not warp, crack, or rot when exposed to moisture or UV, and can be cleaned with a damp cloth — the same care required for the aluminium frame. This makes the Maderia 4 Piece a practical low-maintenance lounge option for patios, alfresco areas, and garden decks. For a dining-capable variant within the same range, the Maderia 5 Piece Mid-Height Dining Set adds a bench and replaces the coffee table with a mid-height dining table.
Available online and in store as part of the A2Z Furniture outdoor furniture range — Rocklea, Sandgate, Bundall (Gold Coast), North Ipswich, and Beenleigh.
Original: $1,377.66
-70%$1,377.66
$413.30Description
The Maderia Outdoor 4 Piece Lounge Set is a charcoal outdoor lounge arrangement consisting of a 3-seater sofa, two single armchairs, and a coffee table with a Polywood slatted top. The powder-coated aluminium frame features Polywood inserts on the armrests, matching the coffee table surface — giving the set a timber-look accent without the maintenance that natural wood requires. Cushions are weatherproof, water-repellent, and UV-protected. Also available in a 5 Piece Mid-Height Dining variant that adds a bench and replaces the coffee table with a mid-height dining table.
3-Seater Lounge
× 1
Single Armchair
× 2
Coffee Table
Polywood Top × 1
Full Set
4 pieces total
Charcoal Powder-Coated Aluminium Frame
Rust-resistant aluminium frame across all four pieces — lightweight, weather-resistant, and suited to year-round outdoor placement without treatment.
Polywood Coffee Table Top & Arm Inserts
Polywood used on the coffee table surface and integrated into the armrests on all seating pieces — timber appearance with no oiling, sealing, or weathering required.
Weatherproof UV-Protected Cushions
Seat and back cushions across the 3-seater and both armchairs — weatherproof, water-repellent, and UV-protected to resist fading under direct outdoor sun.
KD Assembly (Knock-Down)
The set ships flat-packed and assembles without specialist tools — components connect with straightforward hardware included in the box.
About Polywood
Polywood is a recycled plastic lumber material made primarily from post-consumer HDPE (high-density polyethylene). It is engineered to replicate the look of slatted timber while offering properties that natural wood cannot: it does not absorb moisture, does not warp or crack, does not rot, and requires no oiling, sealing, or annual treatment. Its colour is consistent throughout the material, meaning surface scratches do not reveal a different colour underneath. For outdoor furniture that stays in place year-round in Queensland's climate, Polywood is a genuinely low-maintenance surface choice.
On the Maderia 4 Piece set, Polywood appears in two places: as the slatted surface on the coffee table top, and as insert panels on the armrests of the 3-seater and both armchairs. The charcoal aluminium frame and Polywood inserts are finished in complementary tones, creating a consistent two-material look across the set. Both are cleaned with a damp cloth — no specialist products needed.
Polywood Table Top & Arm Inserts
Wipe down with a damp cloth and mild soap — no oiling, sealing, or treatment required. The surface is maintenance-free under normal outdoor use.
Aluminium Frame
Wipe down with a damp cloth as needed. Avoid abrasive cleaners that may scratch the charcoal powder-coat finish.
Cushions
Spot clean with mild soap and a soft cloth. Rinse and allow to air dry fully before restoring to position. Store indoors or cover during extended non-use periods.
Extended Storage
The Polywood and aluminium components can remain outdoors year-round. A breathable furniture cover during extended non-use will keep cushions in best condition and reduce dust accumulation.
Maderia Outdoor 4 Piece Lounge Set — Full Product Details
The Maderia Outdoor 4 Piece Lounge Set is a charcoal outdoor lounge arrangement consisting of a 3-seater sofa, two single armchairs, and a coffee table. All pieces use a charcoal powder-coated aluminium frame. Polywood — a recycled HDPE plastic lumber material — is used for the slatted coffee table top and as armrest inserts on all three seating pieces. The cushions across the sofa and armchairs are weatherproof, water-repellent, and UV-protected. The set ships as KD (knock-down) flat-pack and assembles with included hardware.
Polywood requires no oiling, sealing, or periodic treatment. It does not warp, crack, or rot when exposed to moisture or UV, and can be cleaned with a damp cloth — the same care required for the aluminium frame. This makes the Maderia 4 Piece a practical low-maintenance lounge option for patios, alfresco areas, and garden decks. For a dining-capable variant within the same range, the Maderia 5 Piece Mid-Height Dining Set adds a bench and replaces the coffee table with a mid-height dining table.
Available online and in store as part of the A2Z Furniture outdoor furniture range — Rocklea, Sandgate, Bundall (Gold Coast), North Ipswich, and Beenleigh.
